Scapula is an all-carbon fiber racing fork that’s engineered without compromise. It’s designed from scratch and made entirely by hand — even the tools to build it were designed and made in-house.
Only this way can we be sure it meets our standards. Its design is unique: the load-carrying carbon fibers run uninterrupted from dropouts to the top of the steerer.
Nothing is glued; all is designed and built in one piece for the smooth transfer of forces.
Wall thicknesses are precisely dimensioned in the correct plane to resist shock loads. Even the steerer has an oval interior cross-section. With a lateral stiffness of 55 N/mm deflection and longitudinal stiffness of 60 N/mm, Scapula CT is stiff and safe in all conditions.
Scapula CT’s weight, with steerer cut to a typical 200 mm and including our unique pre-load mechanism, is 275 g — yet this fork is specified for a maximum all-up load of 110 kg (243 lb)!
1 - 1/8 1 - 1/4
260 g (0.61 lb) w/ 200 mm steerer
300 mm; can be cut down by 130mm (minimum length 170 mm)
Integrated fork cone
Fork crown diameter
Length (dropout to crown race)
Max. Tire clearance
Max. Permissible total weight
110 kg (243lb)